Blog Archives

Roadside Mastery: How to Change a Tire Using a Spare Like a Pro

5/24/2024

Welcome to the Schooler Truck and Auto blog, your go-to resource for all things automotive in Fort Worth. Today, we're tackling a common roadside challenge: changing a tire using a spare. As a trusted provider of top-notch auto parts since 1944, we understand the importance of being prepared for unexpected situations on the road. Join us as we guide you through the step-by-step process of changing a tire, empowering you to handle flat tires with confidence.

Why Knowing How to Change a Tire Matters: Before we jump into the tutorial, let's discuss why having this skill is crucial for every driver. Flat tires can happen anywhere, and knowing how to change a tire can save you time, money, and stress. It's a basic yet essential skill that every driver should master to stay safe and mobile on the road.

Step-by-Step Guide to Changing a Tire Using a Spare:

Find a Safe Location:
- Pull over to a safe spot away from traffic.
- Engage your hazard lights and apply the parking brake.
Gather Your Tools:
- Spare tire
- Jack
- Lug wrench
- Wheel wedges (optional, but recommended for added safety)
Prepare the Vehicle:
- Place wheel wedges behind the opposing wheel to prevent rolling.
- Remove the hubcap or wheel cover (if applicable) using the flat end of the lug wrench.
Loosen the Lug Nuts:
- Use the lug wrench to loosen the lug nuts, but do not remove them completely yet.
- If the lug nuts are difficult to turn, apply some penetrating oil and allow it to work its way in.
Jack Up the Vehicle:
- Position the jack under the designated lift point (refer to your vehicle's manual).
- Carefully raise the vehicle until the flat tire is off the ground.
Remove the Flat Tire:
- Finish removing the lug nuts and set them aside.
- Gently pull the flat tire straight toward you to remove it from the hub.
Install the Spare Tire:
- Align the spare tire's holes with the wheel studs.
- Push the spare tire onto the hub until it sits flush.
Secure the Spare Tire:
- Finger-tighten the lug nuts in a star pattern to ensure even tightening.
- Lower the vehicle back to the ground using the jack.
- Use the lug wrench to fully tighten the lug nuts in a crisscross pattern.
Replace Hubcap or Wheel Cover:
- If you removed a hubcap or wheel cover, snap it back into place securely.
Check Tire Pressure:
- Use a tire pressure gauge to check the spare tire's pressure and adjust if needed.
Pack Up and Double-Check:
- Stow away your tools and the flat tire in the trunk.
- Double-check that everything is secure before hitting the road again.

You've successfully conquered the challenge of changing a tire using a spare! With this newfound skill, you can confidently handle flat tires whenever they occur, ensuring a smoother and safer journey on Fort Worth roads. Stay tuned to our blog for more valuable tips on vehicle maintenance and essential auto parts. At Schooler Truck and Auto, we're committed to empowering drivers with the knowledge and tools they need for a hassle-free driving experience.

0 Comments

Mastering Vehicle Maintenance: A Step-by-Step Guide to Oil Changes

5/7/2024

0 Comments

Welcome to the Schooler Truck and Auto blog, where we empower Fort Worth businesses with essential automotive knowledge. Today, we're diving into one of the most fundamental aspects of vehicle maintenance: changing the oil. As a trusted provider of premium auto parts since 1944, we understand the importance of regular maintenance in keeping your fleet running smoothly. Join us as we break down the basics of oil changes, empowering you to maintain your company vehicles like a pro.

Why Regular Oil Changes Matter: Before we delve into the step-by-step process, let's quickly review why regular oil changes are crucial for your vehicles. Oil serves as the lifeblood of your engine, lubricating its moving parts, reducing friction, and preventing overheating. Over time, oil breaks down and becomes contaminated with dirt and debris, compromising its effectiveness. Regular oil changes ensure optimal engine performance, prolonging the lifespan of your vehicles and minimizing the risk of costly repairs down the road.

Step-by-Step Guide to Changing Your Vehicle's Oil:

Gather Your Supplies:
- New oil filter
- Appropriate oil for your vehicle (check your owner's manual)
- Oil filter wrench
- Drain pan
- Funnel
- Gloves and protective eyewear
Prepare Your Vehicle:
- Park on a level surface and engage the parking brake.
- Allow the engine to cool down to prevent burns.
- Place wheel chocks behind the rear wheels for added safety.
Drain the Old Oil:
- Locate the oil drain plug underneath the vehicle.
- Position the drain pan beneath the plug.
- Use a wrench to loosen the drain plug and carefully remove it.
- Allow the old oil to drain completely into the pan.
Replace the Oil Filter:
- Locate the oil filter, typically near the drain plug.
- Use an oil filter wrench to loosen and remove the old filter.
- Apply a thin layer of new oil to the rubber gasket of the new filter.
- Screw the new filter into place by hand, ensuring it's snug but not over-tightened.
Refill with Fresh Oil:
- Consult your owner's manual to determine the correct oil type and capacity.
- Use a funnel to pour the new oil into the engine.
- Check the oil level using the dipstick, and add more if necessary.
Dispose of Used Oil Properly:
- Transfer the used oil from the drain pan to a sealed container.
- Take the used oil to a recycling center or an auto parts store for proper disposal.

Congratulations!
You've just mastered the art of changing your vehicle's oil. By following these simple steps, you can ensure that your company vehicles remain in peak condition, ready to tackle the challenges of the road ahead. At Schooler Truck and Auto, we're committed to empowering Fort Worth businesses with the knowledge and tools they need to keep their fleets running smoothly. Stay tuned to our blog for more expert tips on vehicle maintenance and auto parts essentials.

0 Comments

Roadside Mastery: How to Change a Tire Using a Spare Like a Pro

Mastering Vehicle Maintenance: A Step-by-Step Guide to Oil Changes

Resources

Archives

Categories